Watch video
Click to enlarge
AUTOMATIC POCKET HEMMING UNIT V 300
AUTOMATIC POCKET HEMMING UNIT V 300
Back to products
NE-20
NE-20

AUTOMATIC POCKET HEMMING UNIT V 800

The serging unit is an important production requirement for the nowadays fashion industry. Beside the basic units it considerably increases the production output, providing a great support to the operator. The unit has been specifically developed to grant a high quality result, even on stretch denim fabrics, automating multiple functions that before were completely made by the operator. The new pneumatic device for example, it’s improving the panel movement thanks to a sensors system. In terms of costs saving this unit is the benchmark in its category, installing a new cutting system working with a vacuum, granting a high rate of thread saving.

Category:

Description

FLEXIBILITY

QUALITY

EFFICIENCY

TECHNICAL SPECIFICATIONS

Sewing head: Yamato made in Japan 2 needle overlock
Speed: 6300 rpm
Max Speed: 7000 rpm
Overlock width: 4.0 mm up to 9.6 mm
Stitch per Inch: up to 30 (spi) Power Supply Voltage: 220 V 50/60 Hz
Sewing Machine Motor: Mitsubishi XCG 554 20Y – 550W
Control Box: XCG MFY 2005
Air consumption: 10L/min

FEATURES

  • he innovative pneumatic device controls a wheel that helps the handling on the fabric, especially on curves making the operator’s work easy and efficient and reducing the handling time
  • Pneumatic wheel allows to stitch any fabric from light to heavy, stretch or double stretch, straight or curved
  • Possibility to sew on the back panel with the back yoke already joint, thanks to the automatic back yoke joint detector
  • Special guide device with manual regulation for different fabric thickness
  • Larger opening table
  • Extra Pneumatic cylinder assistance on the cutting device

The accessories described here may not be included in the price of the machine. Please refer to the commercial documents for information on prices and conditions.

ROTATING STORAGE DISK

The disk can contain up to 600 pocket and while unit is working the disk full of pockets can be replaced in 5 seconds with an empty one (supplied optionally)

VACUUM DEVICE AND SENSOR

Automatic cutting system connected with a vacuum device, with sensor for cut at begin and end of operation in an automatic and programmable way

4 thread overlock

4 litres extra oil, always working at the maximum speed without any stop

Yamato sewing head

Both the devices can be adjusted according to fabric thickness for cost saving and easy setup on different styles

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “AUTOMATIC POCKET HEMMING UNIT V 800”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Related products

AUTOMATIC POCKET HEMMING UNIT V 300

Automatic continuous waistband attaching unit for jeans, casual trousers and denim jackets. Machine entirely manufactured in Italy and equipped with Vi.Be.Mac. sewing head. Remarkable simplicity of design, improvement in speed, electronic control of fabric transport, extremely easy solutions and many other features, make the V300 a perfect and only unit which can meet every kind of fashion requirement coming from the trousers and jeans. The FLX model version is convertible with from lockstitch to chainstitch and vice versa or mixed solutions.

AUTOMATIC POCKET HEMMING UNIT V 700

The automatic pocket hemming series, made by the three models V700, V701 and V702, is a line of flexible units with a high level of efficiency and quality output. One unit can supply more sewing lines, following the concept of modular production and space maximization. The units can perform an average production of 1500 up to 2000 pockets per hour, according to the model. The innovative transport system allows the units to perform on many kind of fabrics thickness from workwear to denim and stretch materials.